Logo

Ford G6 P0471 Engine Error Code

When you check Ford G6 car engine light came on code P0471 the reason should be Engine Light ON (or Service Engine Soon Warning Light). However Ford manufacturer may have a different definition for the P0471 OBD-II Diagnostic Powertrain (P) Trouble Code. So you should chech it on our car models.

P0471 Ford G6 Code Clear

A good ground connection is also extremely important. P0471 Ford G6 engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).

P0471 Code Reason

Ford G6 P0471 OBD-II Diagnostic Powertrain (P) Trouble Code Description

Ford G6 car P0471 OBD-II Trouble Code The Exhaust Back Pressure (EBP) sensor is a variable capacitance sensor that, when supplied with a 5-volt reference signal from the Engine Control Module (

Reason For Ford G6 P0471 Code

The reason of Ford G6 P0471 OBD-II Engine Error Code is P0471 Exhaust Pressure Sensor Range/Performance.

There are currently two main types of cylinder deactivation used today, depending on the type of engine. P0471 Ford G6 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.

Ford G6 P0471 Possible Solution :

In-line Ford engines, along with those of most other manufacturers, begin the numbering of cylinders at the front and proceed in numerical order toward the back. In the V-engine design, Ford follows a similar design with the number one cylinder at the front left of the engine. In the V-6 configuration, cylinder 4 is at the front right of the engine and in a V-8, cylinder number 5 is in that location. Other manufacturers sometimes use an alternating pattern in the V-engines.

What does fault code P0471 mean for Ford G6 ?
What does a diagnostic reading P0471 mean for Ford G6 ?
How to fix OBD2 Code P0471 for Ford G6 ?
What do we know about P0471 code for Ford G6 ?