Logo

Chrysler Conquest P0471 Engine Error Code

When you check Chrysler Conquest car engine light came on code P0471 the reason should be Engine Light ON (or Service Engine Soon Warning Light). However Chrysler manufacturer may have a different definition for the P0471 OBD-II Diagnostic Powertrain (P) Trouble Code. So you should chech it on our car models.

P0471 Chrysler Conquest Code Clear

On 1999 and later P0471 Chrysler Conquest engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.

P0471 Code Reason

Chrysler Conquest P0471 OBD-II Diagnostic Powertrain (P) Trouble Code Description

Chrysler Conquest car P0471 OBD-II Trouble Code The Exhaust Back Pressure (EBP) sensor is a variable capacitance sensor that, when supplied with a 5-volt reference signal from the Engine Control Module (

Reason For Chrysler Conquest P0471 Code

The reason of Chrysler Conquest P0471 OBD-II Engine Error Code is P0471 Exhaust Pressure Sensor Range/Performance.

There are currently two main types of cylinder deactivation used today, depending on the type of engine. P0471 Chrysler Conquest code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.

Chrysler Conquest P0471 Possible Solution :

In-line Ford engines, along with those of most other manufacturers, begin the numbering of cylinders at the front and proceed in numerical order toward the back. In the V-engine design, Ford follows a similar design with the number one cylinder at the front left of the engine. In the V-6 configuration, cylinder 4 is at the front right of the engine and in a V-8, cylinder number 5 is in that location. Other manufacturers sometimes use an alternating pattern in the V-engines.

What does fault code P0471 mean for Chrysler Conquest ?
What does a diagnostic reading P0471 mean for Chrysler Conquest ?
How to fix OBD2 Code P0471 for Chrysler Conquest ?
What do we know about P0471 code for Chrysler Conquest ?